Seems easy enough, we just need to cut the 110volt line insert the beast and you are done. Let’s see what 6 hours of work can get you.
The before picture
And… after
It works, we have a [...]
|
||||
|
Seems easy enough, we just need to cut the 110volt line insert the beast and you are done. Let’s see what 6 hours of work can get you.
The before picture
And… after It works, we have a [...] You learn thing and you forget them, you know it exists but for an easier ride you forget them. Bad Bad bad…. Well this was the case for electrical wiring on a 12 volt system for me. I knew that table existed, I knew fusing requirement were set up for a good reason. But [...] After all this learning curve, I was finally in a position to take some reading. The first set was the 60 Amp Hitachi against the 100 Amp Electromaax. The measurements were made with a new model Victor DC amp clamp. The voltage was taken on the house battery bank and the Amp at the cable [...] Taking a short interlude from the water maker to go back the alternator saga! The phone rang early on Monday morning, more precisely it went to the voice-mail at 5.40am. And by 6.40am, I was on the road already returning my call! I then discovered later I was speaking with Rob the support gentleman for [...] I know we interrupt the water maker schedule, not to worry it will come back next post. But we have a big project on our hand, understand the electrical system and a few people are waiting for some evaluation, between the Hitachi on the right side of the ring and the Electromaax on the left [...] Two big arrivals today on Letitgo, one with no stress and one with just a little more spice but all have to do with power. We received our asymmetrical spinnaker from voyager sail, first of all I would like to thanks Dale. During the entire process, his communication was perfect answered all question in [...] This was a long project to complete, the learning curve was steep and in the back of my head the mantra of Mr Calder was always present. “Keep the system balanced, if you want success” Understanding the needs, balancing all the element of the system and finally finding the most practical and economical solution. [...] We were supposed to leave for the long week-end, but life decided otherwise. And in order to compensate, I did a run to Letitgo, while *V* finished a sewing project. A few maintenance items needed to be done for the winter. For the record : winterization of the outboard engine (the holding vice was seized [...] No sailing today for us, after some serious wind for a couple of days, 20 knots in the marina. Today was elected to be replacement of the VHF antenna day. Not so fast was the response from Mother Nature, the sun is not out and it is getting rather chilly out there… Which evidently puts [...] One more note from the editor : Before you get to enjoy the exotic places, the palm trees and your bikinis with dolphins swimming around you…. Yes it is still a dream, nonetheless, we still have all the ground work to do! And along with that comes the technical again with our VHF radio. Fasten [...] |
||||
|
Copyright © 2012 SV Letitgo - All Rights Reserved Powered by WordPress & Atahualpa |
||||